Display Panels
Loading
PNV550

PNV550

The 55" full HD PNV550 professional panel allows you to build video walls with exceptionally thin 3.5 mm* ultra-slim bezels that will complement virtually any commercial or public space. Whether installed in a shopping mall, hotel, control room, transport hub, or conference hall, a bank of these panels will convey your message with overwhelming style and precision. Four PNV550 panels set up in a 2 x 2 configuration, for example, will let you display every last pixel of native 4K Ultra HD (3,840 x 2,160-pixel) content on the equivalent of a 110" Class screen. With the Sharp UCCT (Uniform Color Calibration Technology), color reproduction and brightness are beautifully consistent on each individual panel and thus across the entire video wall.

* 3.5 mm is the minimum combined frame width for neighboring monitors, excluding the gap between the monitors.


RRP:
P.O.A

Features

Uniform Colour Calibration Technology

Uniform Colour Calibration Technology

With Sharp's UCCT (Uniform Colour Calibration Technology), colour reproduction and brightness are beautifully consistent on each individual LCD monitor and thus across the entire video wall.

To varying degrees, unevenness of colour and brightness may occur in LCDs. To compensate for this, Sharp UCCT ensures uniformity of colour and brightness across the entire LCD monitor by properly adjusting colour levels with high precision and high definiition (at the pixel level).

Ultra-Slim Bezel

Ultra-Slim Bezel

The ultra-slim bezel on a PNV550 enables you to combine multiple units to create a virtually seamless digital canvas. The bezels of adjacent monitors in a video wall combine for a total bezel width of just 3.5 mm. This enables the display of large, crisp images with minimal distraction and maximal impact.

Scalability for High - Impact Video Walls

Scalability for High - Impact Video Walls

Multiple PNV550 monitors can be joined together to create video walls configured to a variety of purposes and settings. Easy to
assemble and easily controlled via the RS-232C interface or via a network, video walls composed of Sharp PNV550 monitors bring dynamic, high-impact exposure to commercial display content.

Technical specifications

Expand All
Screen 55-inch widescreen (138.8 cm diagonal) TFT LCD
Max.Resolution 1,920 x 1,080 pixels
Max. Display Colours 16.77 million colours
Pixel Pitch (H x V) 0.63 x 0.63 mm
Max. Brightness (average) 500 cd/m2 (default: 400 cd/m2)
Contrast Ratio 4,000 : 1
Viewing Angle (H/V) 178º / 178º (CR > 10)
Active Screen Area 1,209.6 x 680.4 mm
Response Time 8 ms (grey to grey, avg.)
Backlight LED, full-array
Installation Landscape
Portrait
Touch Technology No
Multi Touch -
PC Connection Port -
Power Supply -
Driver -
Protection Glass Thickness -
Communication -
Button -
Video Analogue RGB (0.7 Vp-p) [75 ], Digital (conforms to DVI 1.0 standards), DisplayPort 1.1a
Synchronisation Horizontal/vertical seperation (TTL: positive/negative), Sync on green, Composite sync (TTL: positive/negative)
Plug & Play VESA DDC2B
Power Management VESA DPMS, DVI DMPM
Standard NTSC (3.58 MHz, 4.43 MHz), PAL, PAL60, SECAM
Options -
Display Port 1
HDMI 1
DVI-I 1
DVI-D -
Component Video 1
PC Analogue mini D-sub 15 pin 1
RS-232C In / out
USB -
Video BNC -
Component BNC -
RCA pin (L/R) -
Audio (3.5mm stereo mini jack) 1
With Options -
DisplayPort 1
DVI-D 1
RCA pin(L/R) -
3.5mm mini stereo jack 1
Micro-USB -
Options -
Standard LAN Port (10Base-T/100Base-TX) x 1
Options -
Built-in -
External -
Mounting VESA ( 4 points), 400 mm pitch
Power Supply 100V - 240V AC, 50/60 Hz
Power Consumption 185 W
Dimensions (W x D x H) (approx, display only) 1,213.5 x 113.8 x 684.3 mm
Weight 25 Kg
Operating Temperature 0ºC to 40ºC
Operating Humidity 20% to 80% RH (No condensation)
Main accessories Cable clamp x 4, cable clamp (insertion type) x 2, power cord x 1, CD-ROM x 1, set-up manual x 1, remote control sensor box mounting hole concealing sticker x 2
Options -

Downloads

Warranty

Business Products Warranty Statement

This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

WARRANTY PERIODS

Data Projector24 months (excluding lamps and air filters)
Copier / Printer  6 months
Electronic Cash Registers12 months
Facsimile12 months
Information Display Panel36 months
POS Terminals12 months
AL Copier12 months
Calculator12 months
Personal Organiser12 months

IMPORTANT NOTICE: This warranty applies to products sold in New Zealand