Display Panels


With a 70-inch-class screen and support for 4K Ultra HD (3,840 x 2,160-pixel) resolution, the PN-H701 offers the size and image quality to make a major visual impact. More than just a superb digital signage solution, this monitor can be set up to provide eye-catching communication in a wide variety of settings. Whether in a retail, office, or public setting, the PN-H701 creates unprecedented new possibilities.



70"-Class 4K Ultra HD

70"-Class 4K Ultra HD

With its huge and seamless screen and four times the resolution of 1080p full HD, PNH701 delivers all the detail, depth, and clarity that the content creator intended. Excelling in any indoor venue—whether in a retail, office, conference, or public setting—this is one monitor that will make an unforgettable impact on any audience.

24/7 Operation

24/7 Operation

Designed for around-the-clock use and rugged operating conditions, the PNH701 is a reliable and commanding presence in demanding 24-hour professional applications.

LAN/RS-232C Control

LAN/RS-232C Control

Thanks to its LAN/RS-232C interface, the PNH701 can be easily controlled and monitored from a central location via a PC. This enables you to remotely turn the monitor on or off, switch its input, or adjust the screen and settings.

Technical specifications

Expand All
Screen 70-inch widescreen (176.6 cm diagonal) TFT LCD
Max.Resolution 3,840 x 2,160 pixels
Max. Display Colours 16.7 milion colours
Pixel Pitch (H x V) 0.401 x 0.401 mm
Max. Brightness (average) 400 cd/m2
Contrast Ratio 3000 : 1
Viewing Angle (H/V) 176º / 176º (CR > 10)
Active Screen Area 1,538.9 x 865.6 mm
Response Time 6 ms (grey to grey, avg)
Backlight LED, edge lit
Installation Landscape
Touch Technology No
Multi Touch -
PC Connection Port -
Power Supply -
Driver -
Protection Glass Thickness -
Communication -
Button -
Video HDMI, Analogue RGB
Synchronisation Horizontal/vertical seperation (TTL: positive/negative)
Plug & Play VESA DDC2B
Power Management -
Standard -
Options -
Display Port -
Component Video -
PC Analogue mini D-sub 15 pin 1
RS-232C 1
Video BNC -
Component BNC -
RCA pin (L/R) -
Audio (3.5mm stereo mini jack) 1
With Options -
DisplayPort -
RCA pin(L/R) -
3.5mm mini stereo jack 1
Micro-USB -
Options -
Standard LAN Port (10Base-T/100Base-TX) x 1
Options -
Built-in 10 W + 10 W
External -
Mounting VESA ( 4 points), 400 mm pitch, M6 screw
Power Supply 100V - 240V AC, 50/60 Hz
Power Consumption 270 W
Dimensions (W x D x H) (approx, display only) 1,559 x 69 x 894 mm
Weight 38 Kg
Operating Temperature 0ºC to 40ºC
Operating Humidity 20% to 80% RH (No condensation)
Main accessories AC power cord, remote control unit, batteries,set-up manual, cable clamps x4, horizontal sticker, vertical sticker, blank sticker, USB drive cover, RS-232 conversion cable, USB extension cable
Options -



Business Products Warranty Statement

This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.


Data Projector24 months (excluding lamps and air filters)
Copier / Printer  6 months
Electronic Cash Registers12 months
Facsimile12 months
Information Display Panel36 months
POS Terminals12 months
AL Copier12 months
Calculator12 months
Personal Organiser12 months

IMPORTANT NOTICE: This warranty applies to products sold in New Zealand